SD Shank Hammer From 4''-12'' With Working Pressure 1.0-2.5Mpa Use For Quarrying
Product description
The DTH Hammer method provides one of the most efficient and versatile ways of drilling in a wide variety of rock conditions for many different applications. It provides fast penetration even in the hardest rock with constant speed throughout the length of the bore hole with the added benefits of accuracy and alignment to give good clean usable holes. DTH does not rely on heavy machines with fast rotational speeds or heavy down-thrusts; it only requires that the hammer be subjected to sufficient thrust to initiate the percussive operation and that there is the appropriate amount of rotational speed, usually around 28 to 40rpm, to relocate the drill bit on the rock face to produce the optimum size of cutting and minimal dust production. Performance, reliability, minimal spares usage, long service life and overall cost effectiveness are the hallmarks of a well-designed and manufactured ‘World Class’ DTH hammer that brings benefits to both the driller and the operating company – it is important to go for quality and not price when making the choice to purchase your DTH hammer.
Product Advantages:
1.Suitable for all types of rock (except clay)
2.Greater versatility in terms of hole sizes
3.Low capital outlay
4.Simple and easy to operate
DTH Hammers Specification:
Model: SD4, SD5, SD6, SD8, SD10, SD12
| | SD4 | SD5 | SD6 | SD8 | SD10 | SD12 |
| Length(less bit) | 1084mm | 1175mm | 1261mm | 1463mm | 1502mm | 1880mm |
| Weight (less bit) | 40.5kg | 72.5kg | 100.0kg | 192.0kg | 290.0kg | 487.0kg |
| External diameter | 99mm | 125mm | 142mm | 180mm | 225mm | 275mm |
| Bits shank | SD4 | SD5 | SD6 | SD8 | SD10 | SD12 |
| Bits diameter | 105-135mm
4 1/8" - 5 1/8" |
130-156mm
5 1/8" - 6 1/8" | 152-203mm
6" - 8" | 200-279mm
7 7/8" - 11" | 254-330mm
10" - 13" | 305-381mm
12" - 15" |
| Connection thread | API 2 3/8" Reg | API 3 1/2" Reg | API 3 1/2" Reg | API 4 1/2" Reg | API 4 1/2" Reg
API 5 1/2" Reg | API 6 5/8" Reg |
| Air pressure | 1.0-2.5 Map | 1.0-25.Mpa | 1.0-2.5Mpa | 1.0-2.5Mpa | 1.0-2.5Mpa | 1.0-2.5Mpa |
Before beginning to drill, there are several factors that you should know:
1. Hole Size:
In most instances, the outside diameter of the hammer closet to the hole size being drilled should be used for most efficient drilling. This reduces the instance of the collapse and makes cleaning the hole easier. One needs to take into account that there must be sufficient annular area around the hammer to pass the drilled cuttings. This normally will supply the most efficient operating conditions.
2. Air consumption:
The amount of compressed air available must be taken into consideration when using a down hole hammer. Different size hammers require different volumes and pressures in order to properly operate. Generally, as the size of the hammer increases, higher volume and lower pressure is needed for peak performance. Be sure to refer to the air consumption chart.
3. Big capacities:
The larger the bit and hammer, the greater the rotational Torque and feed/pull back requirements become. Do not exceed the drill rigs Capacity.
Product application
At present, DTH drilling tool is widely used in underground mining, quarries, hydraulic and Hydro-Power Engineering, water well drilling, Mineral exploration, anchoring hole drilling, geothermal engineering, Subway excavation, another civil engineering.
DTH is one of the most efficient ways of drilling rock, using a rapid hammer action to break the rock into sizeable chips which are then evacuated from the bore hole by the air exhausted from the DTH Hammer. The technique provides fast drilling of accurately aligned, straight and clean holes in most ground conditions.
Company informaiton
At sollroc, customer satisfaction is our top priority. Our sales team takes a proactive approach in meeting customers’ needs. We take the time to get to know you and learn about your operations so we can better assist you. We strive to meet customers’ needs by supplying the tools and equipment you need when you need them, providing product support, and following through with excellent customer service every step of the way.
Product Tags:
|
|
SD Shank DTH Hammer With Working Pressure 2.5Mpa Images
|
