4 3/4'' 121mm Shank SRC004 Reverse Circulation RC Drill Bit In Black For Sampling
Product Introduce:
This reverse circulation drill bits are widely used in the following applicaiton field: Geologic exploration samples and grade control for mining, etc. And it's specifically designed to work with RC Hammers.
SRC series reverse circulation DTH Hammer bits is the latest developed product of our company. It is mainly used for deep exploration drilling and ore grade control.
Technical Parameters
RC bits Model SRC004
| Diameter | No x Button diameter
mm | Button angle | Flushing holes | Shroud Dia
mm | Weight
(kg) | Part No. |
| mm | inch | Gauge Button | Front Button |
| 114 | 4 1/2 | 8 x 14mm | 8 x 13mm | 35 | 2 | 112 | 11.8 | SRC004-114 |
| 118 | 4 5/8 | 8 x 14mm | 8 x 13mm | 35 | 2 | 116 | 12.0 | SRC004-118 |
| 121 | 4 3/4 | 8 x 14mm | 8 x 13mm | 35 | 2 | 119 | 12.4 | SRC004-121 |
| 127 | 5 | 8 x 14mm | 8 x 13mm | 35 | 2 | 125 | 12.8 | SRC004-127 |
Adavantages:
1. the samples extracted by RC drilling are reliable and free of contaminants
2. the method is timely and cost-efficient
3. it is well-suited for difficult terrains
4. it has high penetration rates
5. it has minimal environmental impact
Working principle
The on-board compressor delivers power to a pneumatic reciprocating piston. The piston, in turn, drives a tungsten-steel drill bit which is purpose designed to be able to crush hard rock.
Similar to air core drilling, drill cuttings are returned to surface inside rods. We achieve this through the use of dual wall drill rods: an outer drill rod with an inner tube. When compressed air is blown through the rod, the volume displaces the air, lifting the samples to the surface.
Once cuttings reach a diverter at the top of the hole, they’re moved through a hose and around the cyclone, which slows the sample down. From the cyclone the sample goes over a splitter that delivers a percentage of the entire sample into a sample bag. The exploration drilling team then collect the samples aligned to the hole depth and lay them out for the client to log, and then transport to the lab for assay.
Detailed Photo:
About us:
SOLLROC Reverse Circulation drilling (RC) ,from size 3’’ to 5.5’’, is a technique of drilling that uses dual wall drill rods that consist of an outer drill rod with an inner tube. By using compressed air to extract rock fragments sample,the samples travel through rods to a sample splitter at surface, avoiding all contact between the samples and the borehole wall that allows samples to be retrieved with minimal contamination,which is mainly used in deep hole exploration and mining grade control.
Delivery Way:
By Air, By express or By Sea
Product Tags:
|
|
4 3/4'' 121mm Shank SRC004 Reverse Circulation Drill Bits Images
|
